Mount the crown molding to the cabinet using the brad nailer.
Kitchen cabinets to ceiling with crown molding.
Set the miter saw to a 45 degree angle cut.
Measure and mark the front section of crown molding to the cabinet width.
It all is one continuous piece from the cabinets up to the crown molding.
We didn t want our cabinets to go clear up to 9 so our custom cabinet maker added a soffit that matched the cabinets.
The molding also comes in handy for closing the gap between the top of the cabinets and the ceiling and for creating a unified appearance and style along the sight line near the ceiling.
Here is a working drawing of a kitchen with an 8 ft ceiling.
Using a nail gun nail the crown to the baseboard.
Use a pin nailer to nail into the corners of the two pieces of crown molding image 2.
Here is the same kitchen with a riser molding added below the crown molding which takes the cabinets all the way to the ceiling.
Dry fit the crown molding by holding the front piece and a side piece against the front and side of the baseboard image 1.
This project is easy to do.
Repeat this process with the rest of the cabinets with outside corners.
For any cabinets with an inside corner cut the miters with the opposite 45 degree angle so that the miter angles on the crown molding cut into itself.
The riser molding is outlined in red.
Make sure the pieces are together and in place snugly.
Https bit ly 2cholxk sweet new drone https amzn to 2sp3vqg the fancy glue i used.
Place the crown molding so that it is rests upside down and at a 45 degree angle against the saw fence.
Measure and cut the crown molding front section.
Crown molding from cabinet top to ceiling many of the kitchens we work in have the ceilings up to an inch or so out of level so to simply do a crown on top would be near impossible.
We were extending the crown molding into the kitchen that we put up in the rest of our first floor and wanted to take the time to add height instead of just running the crown molding behind the cabinets.
This design shows crown molding on top of 36 tall uppers and a small space between the crown and ceiling.
Crown molding adds a special touch to kitchen cabinets giving even the most basic cabinets a custom crafted luxe look.
If you have unusual ceiling heights a custom cabinetry specialist can build cabinets to fit any space which may be the most practical solution if you have 10 foot high ceilings.
What we usually do in this instance is to take the cabinets up to 6 from the ceiling.
If there are small gaps above the wall cabinets this can usually be easily filled with crown moldings or other decorative trim work.