The problem is either due to a blocked path between the sensors dirty eyes loose wires at the sensors or at the motor head or just bad sensors.
Craftsman garage door goes up but not down.
Yes there is a problem with the photoelectric eyes.
When the infra red sensors are malfunctioning usually one of the sensor lights will be blinking.
It goes partway down reverses direction and goes back up again.
Can you hold the button down to make the door go down.
If the sensors are not functioning the door will not close close.
Garage door won t go down most common problems when a door won t go down.
It will try stop and the opener incandescent light bulbs will flash 10 times.
I ve unplugged it for 30 mins.
However if your garage door doesn t bounce back up then you know you have a problem.
You push the button to close the garage door.
Get shopping advice from experts friends and the community.
It is a craftsman 1 2 hp garage door opener model 139 53910.
It opened fine this morning then wouldn t shut with the button on the wall or by remote.
I press the remote control and it moves an inch or two then goes back to its original position.
If your garage door hits it bounces up and starts to open again your garage door is working well.
To fix this issue increase the down limit one quarter turn.
The transmitters remotes will not work to close the garage door.
Something is blocking the beam either the sender or receiver is misaligned kicked.
When you pressed the button did the opener lights blink at you.
Its a 1995 vintage sears craftsman 1 2 opener pn 41a43157b.
To reset it and it still flashes 5 times.
If you re craftsman chamberlain etc garage door opener is closing and then opening up its likely a common problem related to the stop limit mechanism.
My garage door will go up but not down.
The door does not move even a little bit.
Simply lay a 2 by 4 on the ground and let the garage door come down on top of it.
What should i do.