In most cases you will cut the recess to match the depth of the hinge.
Correct way to install door hinges.
To install door hinges on a new door measure and mark where your hinges need to go on the door frame and on the door you re hanging.
When you buy the hinges maybe you have trouble in installing the door hinge.
Open and close the door to verify that the oil gets all the way to the bottom part of the hinge pin.
If you are replacing a pre hung door you should use any pre existing hinge locations on the door frame to ensure proper placement.
Use a utility knife to score the outline.
To install butt hinges first decide where they need to go.
Next place your hinge on the door and trace around the hinge with a pencil.
If you re installing a new door you ll need to find the precise location on the door frame for your hinges.
1 place your hinges in the correct location.
A door hinge is usually installed 5 inches 13 cm from the top of the door and 10 inches 25 cm from the bottom.
Most contractors say that 5 inches from the top and 10 inches from the bottom is the best place.
1 first you ll need to remove the screws on both leaves of the existing hinge.
There s no need to remove the door if you replace hinges one at a time.
Butt hinges are a popular variety of recessed hinges.
Slide the hinge up to the line until it covers the x and mark the other end height of the hinge.
Use a butt marker to indicate the proper width for the cut.
With a sharp chisel and hammer cut the wood in the shape of the hinge.
Place the hinge so as to mark the length of it on the doors edge.
Now there has easy way to let you know how to install door hinges.
Now lubricate the hinges with oil and add some drops at the top of the raised pin.
When installing a brand new door the top hinge is usually placed five to seven inches from the top of the door and the bottom hinge is usually placed 10 to 11 inches from the door s bottom.
The easiest way to install new door hinges is to leave the door in place throughout the process.
2 simply remove and replace the old hinge with the new hinge.
Set the marking gauge up as shown in the pictures below and scribe the width of the hinge into the door edge always working from the face edge of the door and frame.