Refer to the smacna architectural sheet metal manual for additional information about detailing and installing flashings.
Corrugated metal roof panel dimensions.
These panels tend to be deeper and thicker than other panels to span longer distances and resist greater loads.
The most common lengths are 8 10 12 and 16 however many distributors will cut to length.
24 ga 26 ga.
The width is measured simply straight across the top of the sheet from.
Roof pitch the metal roofing panels shown in this manual require a min imum slope of 2 ʺ per foot to ensure proper drainage.
Cluding dimensions and angles to your fabral dealer to obtain pricing and availability.
The standard width of corrugated roof sheets is 26 inches which accommodates the common rafter truss and joist spacing of 24 inches.
This deeper groove offers a stronger overall panel in any gauge thickness and allow for a larger span.
Panel attachment exposed fastener metal panel.
The 2 67 x 3 4 corrugated profile offers a deep groove for a more pronounced corrugated style.
Standard lengths for corrugated roofing are 8 10 and 12 feet.
The width varies greatly depending on the style of roofing.
For longer slopes and lower roof pitches contact fabral for other suitable profiles.
Siding coverage cuts easily with standard tin snips.
Gauge 26 29 and 32.
Refer to the rain carrying table in this booklet for the maximum allowable panel length per slope that will provide adequate drainage.
Roof coverage or 24 in.
22 ga 20 ga.
7 8 corrugated roof panels are about performance on a large scale.
The extra two inches allows the roofing panel s corrugations or ribs to stretch between outside edges of adjacent rafters and overlap successive sheets of roofing.
Common metal roof sheet sizes roofing panels come in many styles and dimensions with different overlap dimensions.
Rib height 1 4.
Corrugated panels are a good choice for the environment.
Contact our staff 44 20 3455 0451 44 20 3455 0451.
The most common widths are 24 and 36 exposed but the actual width of the panel will be larger to accommodate an overlap.
The 3 4 corrugated is offer in both the galvalume and aluminum materials in standard lengths of 8 10 12 long.
Coatings galvalume plus 29 and 26 gauge and galvanized 32 gauge.
Safety always work safely when installing metal products and use extreme caution on the roof at all times.
7 8 corrugated roof.