The first raw of fixings at eave is located at 2 5 cm.
Coroline roofing sheets fitting instructions.
Starting purlins must be at the correct centres and not less than 25mm square supported by rafters.
Cut the panels to the desired.
Roofing grade osb or plywood supported on a trussed roof structure as detailed below.
This will allow you to decide if it requires maintenance upgrading or strengthening prior to fixing the sheets.
Minimum pitch required.
That s why we have a completely free chat service at eroofs where you can ask our experts any of your roofing queries.
Coroline roofing sheets fixing instructions on their own might still leave you with unanswered questions.
Below we provide in depth information about coroline and what you can do with this system.
If a two sheet run is required lay the sheets in this position and use the same fixing instructions as above.
You only need some basic tools and materials.
Roofing megastore introduces a short video description on corrugated bitumen roof sheets including advantages benefits uses and how to install the corrugat.
A useful tip is to use a timber spacer to keep purlins square to eaves.
15 start laying sheets over the gutter with 6 cm overhang maximum.
Corrugated roofing is a great way to top a garden shed shop or patio.
Coroline corrugated bituminous roofing sheet coroline fixing instructions corrugated bituminous roofing sheet 1.
For an existing roof survey your roof structure.
The coroline roofing system is a popular alternative for smaller outdoor roof surfaces.
How to install corrugated roofing.
Cutting if cutting is necessary use a fine toothed hand.
Coroline roofing sheets installation and accessories.
Pay particular attention to the construction of the roof section.
This solution is an ideal material for shed roofing carports and other garden areas such as summer houses.
In this case.
You will require either a purlin on rafters or decked roof e g.
To ask an expert simply go onto the website at eroofs and a chat box should appear at the bottom of the screen when an.
Please seek advice from the technical team for guidance and instruction on fitting coroline corrugated bituminous roofing sheet.
Make a note of the roof construction.
Tile sheets have to be laid from right to left sequence starting on the right hand side of the roof laying on the next sheet to the left lapping over the profile with the small gully detail on the last lap of the left of the sheet.