It s quick easy low cost and you can do it yourself.
Coroline roofing instructions.
Start laying sheets over the gutter with 6 cm overhang maximum.
Start alternate courses of sheets with a half width sheet.
The first raw of fixings at eave is located at 2 5 cm from the edge of the roof support osb or purlin.
Straightforward installation long lasting appearance durability and a 15 year warranty are reasons why.
The order you install the panels should be dictated by the direction of the wind.
This forms a broken bond sheet pattern thus avoiding a 4 ply sheet thickness build up at the corners of sheets.
Comprising corrugated bitumen sheets translucent pvc rooflight sheets ridge fixings and eaves fillers the coroline range provides the complete roofing solution.
Cut the panels to the desired.
You only need some basic tools and materials.
Cutting if cutting is necessary use a fine toothed hand saw or.
This quick guide will help you get a better understanding on how to get the perfect installation on.
Wondering how to go about installing your coroline roof.
For more information see our legal terms.
Position and fix an additional purlin at the ridge to take ridge fixings.
Continue to install the sheet on the roof fixing through the crown of the corrugation.
Lay sheets in the opposite direction to the prevailing winds.
On a solid decked roof use a coroline.
Four attractive colours make coroline an extremely popular alternative.
A useful tip is to use a timber spacer to keep purlins square to eaves.
How to install corrugated roofing.
You should then lay your coroline panels along the lowest end and add rows above in the same direction as needed.
If cutting is necessary cut coroline sheets to length using a hand saw with a lubricating spray on the blade.
Coroline corrugated bituminous roofing sheet coroline fixing instructions corrugated bituminous roofing sheet 1.
Secure the sheet in place and ﬁx to the verge using coroline ﬁxings at 100mm centres.
How to install the coroline bitumen sheets and accessories on roofing projects such as garden sheds garages stables and agricultural buildings.
Starting purlins must be at the correct centres and not less than 25mm square supported by rafters.