Run the strips under a row of shingles at the roof ridge making sure that at least 2 inches of the copper are exposed.
Copper strip roof ridge.
The copper strip may need to take time to establish itself for the sulphate to protect the roof.
The success of any copper moss prevention system is reliant on the quality of copper used copper ridge spr only uses pure copper in all our product range ensuring maximum copper sulphur is produced.
With a copper ridge or strip fitted every time it rains the copper reacts with the rainfall and a tiny amount of copper is dissolved into the rainwater creating copper oxides.
If your roof is larger than average you might need to fix more than one strip.
The copper ridge is a unique product that is manufactured to prevent roof moss growth.
These copper strips can be installed with new shingles or you can apply the copper on top of the ridge cap shingles on an existing roof to extend the life of asphalt shingles.
In this case add a copper strip at the midway point down the roof too.
Copper roof strips youtube.
Copyright 2019 tim carter.
A copper strip on each side of the roof.
Sqinaa copper metal foil roll brass 0 2mm 4 x 40in cu metal sheet copper strip for diy cut crafts making 0 3mm.
When the copper loaded rainwater washes down the roof it acts as an inhibitor to moss growth.
Rainwater mixed with the oxygen in the air produces copper salts which are released from the strip onto the roof reducing moss growth.
Some signs of moss may still be evident before the copper prevention is fully effective.
Copper strips are fitted on the roof ridge by a2 corrosion resistant stainless steel screws.
Click on the sketch to purchase copper roof strips for your roof.
Add a 2 inch thick strip of copper across the ridge of your roof as close to the pitch as possible.
Here s how to install the copper on a new roof installation.
It is fixed to the ridge line of the roof with screws and waterproof caps and will ensure a moss free roof for years to come.
Install copper strip on roof you can install a 12 inch wide thin copper strip on a new roof so an inch of the copper strip rests under the cap shingles and the copper folds under the last full shingle on the roof.
It can be used on all types of ridge tiles and is very discreet it can be seen from street level but doesn t draw attention.
This will protect roof shingles and tiles from growing moss.
Copper ridge systems products are an effective way of cleaning your roof and providing an effective moss killer.
This will depend on the type of roof and the weather conditions.