Interlocking flat ribbed concrete tile double roman concrete tile double pan concrete tile cordova concrete tile natural slate roof tile.
Concrete roof slab details.
This is a detailed design drawing of standard concrete roof tile profiles cross sections specifications.
Slabs supported on four sides of each slab panel by relatively deep stiff edge beams.
The maximum diameter of bar used in slab should not exceed 1 8 of the total thickness of slab.
The diameter of bar generally used in slabs are.
Maximum spacing of main bar is restricted to 3 times effective depth or 300 mm whichever is less.
For example the florida based company hurricane proof systems offers a 7 inch 18 centimeter slab of concrete in three layers.
While it was not a part of the 1977.
Reinforced concrete sloped roof slab overhang detailcross section detail of a reinforced concrete sloped inclined roof slab overhang cantilever detail s.
Ubc recommend concrete slab and composite topping slab serving as structural diaphragm used to transmit earthquake forces to be 50mm.
6 mm 8 mm 10 mm 12mm and 16mm.
1 5 minimum thickness of two way slab aci 318 14 provided recommendations to determine minimum thickness of slabs including slabs with beams flat slabs flat plates that can be found here.
Conventional concrete slabs are square in shape and have a length of 4m.
A concrete roof is exactly what it sounds like.
Exact specifications vary but most concrete roofs are several inches thick.
Reinforcement is provided in conventional slab and the bars which are set in horizontal are called main reinforcement bars and bars which are set in vertical are called distribution bars.
Oct 4 2017 flat concrete roof construction details detail drawings.
Even though a treated concrete slab is waterproof standing water on a roof terrace should be avoided and so all roof terrace slabs should be built with a small slope to ensure that all water is drained.
One layer derbigum sp4 waterproofing membrane with 75mm side laps and 100mm end laps sealed to primed surface to falls and crossfalls by torch fusion finished with two coats bituminous aluminum paint.
Waterproofing to be installed by an approved derbigum contractor under a ten year guarantee.
Thickness of the slab is decided based on span to depth ratio specified in is456 2000.
A solid slab of concrete capping the top of your house.