This makes the structure itself far more salvageable if worse comes to worst.
Concrete roof construction.
The roof finish is standing seam metal attached to the structural concrete roof formed by the lite deck system.
The blocks come in several sizes but this guide will assume you are using a 16 3 4 inch wide concrete slab.
The mix of concrete for the slab is usually by volume and is of proportion 1 2 4 cement sand and aggregate.
Step 3 placing the steel joists.
A concrete roof also cuts down the risk of damage from fire termites fungi and water damage while floodwaters might deform or float a wooden home a well built concrete home will stand solid.
The steel joists will provide a strong foundation for the flat concrete roofing.
The flat concrete roof itself can be up to 7 inches thick although the greater the thickness the more the concrete will need be poured in increasing numbers of layers with each one needing to dry before the next is poured.
You can either use removable concrete forms or forms that are made of concrete and insulate the house.
Pouring the concrete roof easy step building a country house traditional construction.
There are two ways to make a framework for a flat concrete roof.
Notes from the architect.
One of the most crucial step in building a flat concrete roof is to figure out the size of the concrete block you will need.
The cap beam evenly distributes the load of the roof slab to the piles below.
The muldraugh ky safe room project we finished using lite deck is performing much better than expected.
Concrete construction the simplest way to construct a roof terrace is by utilising a concrete slab.
The design of a roof slab consists of thickness of slab size of bars spacing of bars hooks cranks and laps of bars minimum cover of concrete etc.
Key steps to constructing a concrete roof slab.