A brick patio design looks well with brick or stone seat walls with bluestone or limestone caps.
Concrete block seat wall.
For a paver patio design seat walls can be coordinating concrete block or stone.
The wall has an s curve that helps it to blend well with the rounded design of the fire pit and patio.
If you use stone be sure to soften sharp edges that might cut into the backs of legs.
A stable wall needs a solid foundation for this wall that means concrete.
Step 3 the seat to be comfortable the seat itself should only be 18 to 20 inches high so you ll only need 2 rows of concrete blocks.
Place them on the cured concrete.
A comfortable sitting height for a wall is 18 to 24 inches including capstones.
Once it is on there take your concrete slab and lay if over the top of the cement.
Sitting walls for concrete patios can be almost anything.
This places the retaining wall and the potential seat wall t the edges of our most frequently used outdoor living spaces.
Most cast concrete stones are heavy enough to stay upright without help.
Installing a seat wall on just one side of a fire pit still leaves the option to pull a more comfortable chair up next to the fire.
Dig a trench for the concrete foundation about one foot wide and 4 to 5 inches deep running the full length of the seating wall.
A typical seat wall is constructed using 8 12 inch wide cinderblock and topping it with a decorative cap of brick stone or bull nosed cast concrete.
Look through concrete seat wall pictures in different colors and styles and when you find some.
Use a square shovel to level out the bottom of the trench.
With the slab ready cut to the correct size take your cement and lay a little over the top.
Cover with polyethylene and allow to cure for several days before you put the concrete blocks in place for the seats.
Simply extend the retaining wall 18 to 2 above the newly raised patio to provide a comfortable seating bench all year around.
In this case the top of the excavation is sometimes boxed with lumber to create a finished appearance.
Browse 218 concrete seat wall on houzz whether you want inspiration for planning concrete seat wall or are building designer concrete seat wall from scratch houzz has 218 pictures from the best designers decorators and architects in the country including dunn lumber co.
Our preferences is a block core with an ultra smooth stucco that looks like poured concrete.
Here the seat wall is stacked stone with a colored concrete cap.
The concrete foundation needed to support a cement block wall is usually created by pouring concrete into a hollow form lining the sides of the excavation trench but the concrete can also simply be poured into the trench a common scenario for construction of a freestanding landscape wall.
Seat walls as patio borders.
Use a grinder to hone edges and create a smoother surface.
The cap can be block for block walls or even bluestone.
Build the wall photo by kolin smith.
Stone walls should have a bluestone or limestone cap.