Used correctly it improves roof safety while making maintenance work easier.
Cooper roof over steps.
Roofs using pans longer than 10 feet should be designed to accommodate additional movement at the ends of the pans.
Roof pro support bases form part of the step over solution providing easy positioning and levelling.
Construct the roof whether flat or gabled using 2 by 4 framing.
Please note the material located on the mr.
By finishing the edge you get rid of sharp edges and complete the look of the roof.
At the roof edge you will leave enough copper to overlap the roof by about two inches.
I do not think you can get them premade as they have to be built in as part of the structure of the wall or roof over the door frame.
Sheets can be either preformed or formed in the field into pans.
Cooper is a registered service mark of nationstar mortgage llc.
Aug 2 2016 explore rachel thayer s board roof overhang followed by 128 people on pinterest.
Roof pro step over systems are non penetrative and free standing.
These pivot and threaded bases can be adjusted on site and moved easily for maintenance access.
Wear gloves when touching the copper.
Test a small portion of the roof with this method before you clean the entire roof to make sure that the paste doesn t have any adverse reaction to your roof.
Add 1 2 inch sheathing to the top of the roof using eight penny nails.
Then you will fold the copper under and around the lip of the roof.
Pans up to 10 feet long are considered short pans.
Clean off residue or road grime with a mild solution of bleach and water.
It is a small peaked roof canopy shaped thing which sticks out from the side of the house or from the roof just above the door.
Copper roofing is typically constructed using 16 oz.
Wet down the copper first then use a 10 bleach solution to wash off the copper.
At least what i know of as a gable.
Cold rolled copper sheets.
The copper cleaning gel will not work as well if there is oil or road grime on the copper.
They are fabricated from galvanised mild steel which ensures corrosion resistance.
Notch the tops of the posts so that the beams will recess into the posts and rest on a ledge.
I think what you refer to is called a gable.
Smear the paste onto your roof with a painter s brush.
A step over is a bridge type structure designed to allow safe access over various obstacles such as ducting parapet walls pipework plant equipment or any other obstructions.
Next you will use your crimping tool to finish off the edge of the shingle.
Apply the paste to a portion of your copper roof.
Attach the side beams to the tops of the posts using three inch wood screws.